FAQ
Frequently Asked Questions
Answers to frequently asked questions about ABEL pumps, applications, service, and technology.
Who is ABEL?
ABEL is an internationally active company specializing in high-quality pump solutions. Since 1947, we have been developing and manufacturing pump solutions for various industries (e.g., mining, the water and wastewater sector, and the ceramics and chemical industries). Our focus is on high-quality pump solutions that are characterized by durability and reliability in demanding and abrasive pumping applications. ABEL’s headquarters are located in Büchen, Germany. Additional ABEL locations are in the U.S., Spain, and India.
What services does ABEL offer?
The ABEL pump lineup includes piston diaphragm pumps, electric diaphragm pumps, high-pressure pumps, and solids-handling pumps for various performance ranges. If needed, our pumps can be supplemented with smart components such as the AI-powered pump monitoring system “Smart Pump Assistant.” Of course, we offer services throughout the entire life cycle of the pumps, including the supply of replacement parts, technical consulting, and on-site repairs and maintenance.
Does ABEL offer customized pump solutions?
Yes, ABEL pumps can be optimally tailored to the specific application, customer requirements, and operational processes through a variety of sizes and material options. Many ABEL pumps are also available in ATEX versions.
How can I get in touch?
You can reach us at any time via the contact form on our website or you can contact our locations by email:
ABEL GmbH Headquarters, Germany: abel-mail@idexcorp.com
ABEL Pumps L.P. Sales & Service, US: abelpumpsus@idexcorp.com
ABEL Equipos S.A. Sales & Service, Spain: aeq-mail@idexcorp.com
Our team looks forward to hearing from you.
Frequently Asked Questions About the Piston Diaphragm Pump
Welcome to the question and answer section for piston diaphragm pumps type HMD and CM.
If you have not found an answer to your question, please do not hesitate to contact us directly.
General
Questions
What makes ABEL piston diaphragm pumps unique?
They feature a hermetically sealed design (which minimizes the risk of leakage), are ideal for corrosive and abrasive fluids, require very little maintenance due to the few parts that come into contact with the fluid, and are very energy-efficient compared to centrifugal pumps.
Which media can piston diaphragm pumps convey?
General: The medium to be pumped must be free-flowing and must not settle out inside the pump.
pH value: There are no fixed limits for pH values for certain materials. However, it is possible to test for resistance if the type of acid or base is known in addition to the pH value (or alternatively the concentration). With regard to the resistance of materials, the medium temperature also plays a very important role.
Temperature: Up to 100°C – for pumps with polypropylene housings up to 60°C.
Particle sizes: For ball valves, the maximum particle size is 15 mm. The maximum particle sizes are to be understood as diameters. Long, fibrous solids may well exceed the above values.
How long is the delivery time?
The pumps are generally produced to order. However, some pumps have relatively short delivery times of about 8 weeks for CM and 10 weeks for HMD, ex works. Spare parts are usually in stock.
Are there references for our application?
Yes, we have several thousand piston diaphragm pumps in use worldwide. CM and HMD pumps are particularly well represented in filter press feeding and the transport of abrasive and corrosive slurries.
What must be observed when using your pumps?
The operating instructions must be strictly followed. Our pumps can be adapted to different operating conditions, e.g. through the choice of material. However, there are also application limits in terms of temperature, particle size and maximum pressure. It is important to know that our pumps are “genuine” positive displacement pumps that must not be operated against a closed line.
Is there any way to see or test the pump in action?
As a rule, testing is not possible. However, thanks to our experience, we can make reliable statements about the operation of an ABEL pump for your specific application. We configure the pump according to your requirements and carry out a test run before delivery to put the pump through its paces. You will receive the test report together with the pump documentation. On request, we can organize a visit to a reference plant to see an ABEL pump in operation.
How do ABEL pumps differ from those of the competition?
ABEL specializes in oscillating positive displacement pumps with particular expertise in piston diaphragm pumps. Our pump expertise and practical experience are unique, and we have our own research and development department and pump service team. After your purchase, you can therefore rely on our on-site support. We manufacture our pumps according to high “Made in Germany” quality standards, which is reflected in the durability and reliability of our pumps.
Is the pump manufactured sustainably?
We manufacture all pumps at our headquarters in Büchen near Hamburg, Germany. Our quality management system is ISO 9001 certified, and we continuously invest in the sustainability of our location to reduce our CO2 emissions.
Are PFAS used in the pump?
This group of substances is only used if the application/pumped medium requires a perfluorinated or polyfluorinated material (resistance).
Technical Data & Performance
What is the maximum pressure that HMD and CM piston diaphragm pumps can deliver?
In general:
HMD: 10 MPa (1450 psi)
CM: 2.5 MPa (362 psi)
Special designs CM & HMD:
Rubber-Coated: 2.5 MPa (362 psi)
Polypropylene: 1.6 MPa (232 psi)
What is the maximum flow rate for HMD and CM piston diaphragm pumps?
HMD: Up to 70 m³/h (308 gpm), in filter press feeding up to 90 m³/h (396 gpm)
CM: Up to 30 m³/h (130 gpm)
What is the maximum suction height?
Piston diaphragm pumps can easily suck up to 2 m (at a density of 1 kg/l) without significant loss of flow, but in this case they should be equipped with a suction flow stabilizer (suction-side pulsation damper). Suction heights in the range of 2 to 5 m are associated with a flow rate loss of approx. 10% per additional meter.
What materials are available for the parts that come into contact with the product?
Housing: Ductile iron, stainless steel, rubber-coated, polypropylene
CM Diaphragms: Polyurethane, TPE, FPM, PTFE, EPDM
HMD Diaphragms: NBR, HNBR, TPE, FPM, PTFE, EPDM
Valves: Various plastics and stainless steel
What is the overall efficiency of the pump?
ABEL piston diaphragm pumps are characterized by a very high overall efficiency, which is usually (depending on the application) in the range of 85-87%.
How high is the installed drive power?
This depends on the hydraulic power and varies between 1.5 and 45 kW.
How does the pump operate?
ABEL piston diaphragm pumps generally operate at low stroke rates. This promotes smooth running. In addition, the pumps can be equipped with pulsation dampers to reduce vibrations to a minimum.
How much space does the pump require?
Generally speaking, pumps with lower flow rates require less space. The smallest CM pump measures approximately 1.0 m × 0.4 m × 1.3 m (L × W × H). Large HM pumps, on the other hand, can measure up to approximately 4.0 m × 1.5 m × 3.0 m (L × W × H). Design adjustments to accommodate local conditions are possible.
How much does the pump weigh?
The smallest CM pump weighs approximately 215 kg. The weight of larger HMD pumps, on the other hand, can exceed 3000 kg.
What is the condition of the paint?
As standard, the pumps are primed with an epoxy-based primer and then painted with a polyurethane-based ABEL Blue paint (RAL 5015). Other colors are available on request. The coating thickness is 80 µm in total as standard.
Configuration & Operation
Can the pump be operated with a frequency converter?
Yes. For very low speeds, however, motors with external fans are required.
Is there a possibility of a BUS connection?
Bus connections are also possible in combination with appropriate frequency converters.
What voltage and control voltage is used to operate the pump?
The motor voltage depends on the available three-phase power supply (voltage, frequency). The control voltage is normally 230 V AC or 24 V DC.
What protective devices are required?
The drive motor must be protected accordingly (overcurrent). Operation against closed shut-off devices must be avoided! The pumps are additionally protected on the hydraulic side with a safety valve.
Can the pumps be used indoors and outdoors?
Yes, pumps can in principle be used both indoors and outdoors. However, certain aspects must be taken into account, starting with the design of the pumps. Especially in outdoor areas, additional protection against direct weather influences is required and the motor must be suitable for the temperature range.
What documentation is available?
You will receive comprehensive pump documentation. This includes the operating manual, dimensional drawing, sectional drawing, parts list and declaration of conformity.
What specific approvals do the pumps have?
CM and HMD pumps are also available in ATEX versions on request, not only for ATEX zones at the installation site, but also taking into account a possible ATEX zone inside the pump when pumping flammable liquids.
What accessories are available for piston diaphragm pumps?
Optional accessories for our pumps include, for example, air supply for the suction and pressure sides, electrical diaphragm monitoring, suction flow stabilizer, pulsation damper, frequency converter and the AI-powered pump monitoring system “Smart Pump Assistant”.
How are piston diaphragm pumps monitored?
We recommend the ABEL Smart Pump Assistant for pump monitoring. This not only makes it easy to monitor important operating parameters such as pressure, flow rate, and temperature, but also digitizes data on pump health. The pump data is evaluated using AI and clearly displayed in the ABEL app. Even predictive maintenance is possible.
How is the piston diaphragm pump controlled in filter press feeding?
HMD and CM pumps can be controlled via a frequency converter. In filter press feeding, the CM can also be controlled by diaphragm stroke control. Thanks to this pressure-dependent stroke control, it automatically reduces the flow rate as the filtration pressure increases.
Can ABEL piston diaphragm pumps also feed membrane filter presses?
Yes, feeding membrane filter presses is possible without any problems.
Costs
What are the operating costs?
ABEL piston-diaphragm pumps provide the ideal conditions for low operating costs. Thanks to their high efficiency, they result in low energy costs, and the intelligent maintenance planning provided by the Smart Pump Assistant optimizes maintenance intervals and increases pump availability.
How much do replacement/wear parts cost?
As a rule, spare part costs are manageable, as piston diaphragm pumps are comparatively low-maintenance. The main components that should be replaced regularly are diaphragms, valve seats, and valve balls.
What is the pump’s energy consumption?
Energy consumption depends on the pump size (motor used) and the number of operating hours. Real-world examples show consumption rates of less than 1 kWh per metric ton of filter cake or savings of up to 75% compared to other systems.
Maintenance
What is the service life of piston diaphragm pumps?
The service life naturally depends on the location (e.g., weather conditions) and operating conditions (daily operating hours, properties of the product to be pumped). However, with good care and regular maintenance, the service life of an ABEL piston diaphragm pump can easily be up to 30 years. ABEL pumps are very durable and we guarantee the availability of spare parts even for older pump models.
What is the service life of the wearing parts?
The service life naturally also depends on the medium, the application and the daily operating hours. Highly abrasive and corrosive media generally put more strain on wearing parts. With normal use and normal run time, valve balls, diaphragms and valve seats generally need to be replaced once a year.
How long does it take to replace the wear parts?
Average maintenance work can usually be completed within a few hours.
Is maintenance complicated?
Scheduled maintenance is usually straightforward. If you have your own maintenance team, we will be happy to show you what to do in advance during a training session. If you do not have a maintenance team, an ABEL service technician can carry out the maintenance.
Do I need special tools for pump maintenance?
Special tools may be required, particularly for maintaining the HMD piston diaphragm pump. If you did not purchase these with the pump, you can order them from us at a later date.
Frequently Asked Questions About the Electric Diaphragm Pump
Welcome to the question and answer section for the electric diaphragm pump (ABEL EM).
If you have not found an answer to your question, please do not hesitate to contact us directly.
General
Questions
What makes ABEL electric diaphragm pumps unique?
Our pumps in the EM series are characterized above all by their low energy consumption due to the efficient drive. In addition, the design is very compact, and the pumps have a stable flow characteristic, i.e. the flow rate is not dependent on the back pressure, as is the case with many other pumps.
What does an electric diaphragm pump cost?
The price naturally depends on the size, the exact configuration and the materials used. Roughly speaking, the price range starts at approx. 6000.00 EUR for an order quantity of 1 piece (ex works, unpacked). But please contact us for an individual offer.
How long is the delivery time?
The pumps are generally produced to order. However, some pumps have relatively short delivery times of approx. 7 weeks ex works. Spare parts are usually in stock.
Which media can be pumped?
General: The medium to be pumped must be free-flowing and must not settle out inside the pump.
pH value: There are no fixed limits for pH values for certain materials. However, it is possible to test for resistance if the type of acid or base is known in addition to the pH value (or alternatively the concentration). With regard to the resistance of materials, the medium temperature also plays a very important role.
Temperature: Up to 60°C.
Particle sizes: For ball valves, the maximum particle size ranges from 3 mm to 12 mm. Butterfly valves can handle larger particles: up to 16 mm to 24 mm. The maximum particle sizes are to be understood as diameters. Long, fibrous solids may well exceed the above values.
How high is the saving in energy consumption compared to an AODD pump?
Depending on the application, the savings can be up to 80%. We will be happy to calculate your individual savings upon request .
Are there references for our application?
Yes, we have several thousand EM pumps in use worldwide. EM pumps are particularly well represented in the transportation of industrial wastewater, abrasive and corrosive sludges and chemical liquids.
What must be observed when using your pumps?
First and foremost the enclosed operating manual. Our pumps can be adapted to different operating conditions, e.g. through the choice of material. However, there are also application limits in terms of temperature, particle size and maximum pressure. It is important to know that our pumps are “genuine” positive displacement pumps that must not be operated against a closed valve.
What is the service life of the wearing parts?
The service life naturally also depends on the medium, the application and the daily running time. Highly abrasive and corrosive media generally put more strain on wearing parts. With normal use and normal running time, valve balls, diaphragms and valve seats generally need to be replaced once a year.
Configuration - Equipment - Design
What materials are available for housings/diaphragms/valve balls/valve seats? In which materials are the pumps available?
Housing: ductile iron, stainless steel (1.4581), polypropylene
Diaphragms: NBR, EPDM, FPM, PTFE, SBR
Valve balls: Polyurethane, EPDM, FPM, PTFE, stainless steel
Valve seats: Polyurethane, EPDM, FPM, PTFE, HD-PE, stainless steel
How is the pump monitored?
In addition to a pressure gauge, there is an electrical diaphragm rupture monitor. The pump can be protected against overpressure with a pressure switch.
Can the pump be operated with a frequency converter?
Yes
Are there also integrated frequency converters?
Yes, in this case the frequency converters are mounted directly on the motor terminal box.
What is a nil-flow control?
This is a pressure-dependent automatic stop-start function. The nil-flow control of the ABEL EM pumps sends a signal to the frequency converter to switch off when the adjustable pressure is reached. As a result, the pump is gradually reduced, de-energized and put into standby mode. The process pressure is monitored continuously. If this drops, the pump starts up again automatically.
Is there a possibility of a BUS connection?
Bus connections are also possible in combination with appropriate frequency converters.
Can the pumps be used indoors and outdoors?
Yes, pumps can in principle be used both indoors and outdoors.
What is the condition of the paint?
As standard, the pumps are primed with an epoxy-based primer and then painted with a polyurethane-based ABEL Blue paint (RAL 5015). Other colors are available on request. The coating thickness is 80 µm in total as standard.
What voltage and control voltage is used to operate the pump?
The pump drive motor can be supplied in single phase or three phase as well as 50Hz or 60Hz frequencies and generally any voltage to meet the installation requirements. The control voltage is normally 230 V AC or 24 V DC.
What are the dimensions of an electric diaphragm pump?
Details of the dimensions can be found in the “Dimensions & weights” data sheet.
What pipe sizes/connection sizes are available?
The size of the suction or pressure connection differs depending on the pump size. The connection sizes range from G ½” to DN100. (1/2“ NPT to 4“ 150 lbs.)
What is the maximum pressure level?
EM pumps can handle a delivery head of up to 60 m (6 bar / 90 psi continuous or 8 bar / 115 psi intermittently).
Documentation
What documentation is available for the devices?
You will receive comprehensive pump documentation. This includes the operating manual, dimensional drawing, sectional drawing, parts list and declaration of conformity
What specific approvals do the pumps have?
Electric diaphragm pumps are also available in an ATEX version on request, not only for ATEX zones at the installation site, but also taking into account a possible ATEX zone inside the pump when pumping flammable liquids.